Basic Printing; Selecting Paper Size; Selecting Number Of Copies; Collating Copies - Oki MPS930b User Manual

B P
ASIC RINTING
When you send a job to the printer, you should select the paper size,
number of copies, orientation, and decide if you want the copies
collated. This can often be done from windows specific to your
application. The instructions in this section refer to setting these
options directly through the driver.
S P
ELECTING APER
You can select from a list of standard paper sizes.
The most convenient way to enable this feature is by using your
Printer Properties. You may also enable this feature at the Operator
Panel or by using the EWS.
To select the paper size through your Printer Properties:
1. Select the desired Paper Size from the Paper Size pulldown in
the Setup Tab of your Printer Properties.
2. Click OK.
S N
ELECTING UMBER OF
You can select the number of copies to print via your Printer
Properties. When selecting the number of copies, you should also
decide if those copies are collated.
To select number of copies:
1. Select the Job Options tab within your Printer Properties.
2. Either enter the number of copies or select from the
pulldown.
3. Click OK.
C C
OLLATING OPIES
When printing multiple copies of a job, the output can be
automatically collated if desired. When copies are collated, they are
printed in groups by the print job not by the page. If you do not
select the collate option, your copies will be printed by page. So, 10
page number 1's will print and then 10 page number 2's will print.
Collated jobs will print all pagesof the first copy and then all pages
of the next.
S
IZE
C
OPIES
MPS930b User's Guide> 18