Novell Setup - Oki C9200 Setup Manual

11
Network Install: Windows & Novell (cont.)
Default Gateway
If your local network is attached to other networks, you
can specify the address of your default gateway (format
XXX.XXX.XXX.XXX, XXX = number from 0 to 255).
This gateway will be selected whenever messages need to
be sent to another network.
!
If you select an invalid default gateway or the
default gateway becomes unavailable, the OkiLAN
6200e may not be able to communicate with non-
local networks.
WINS Server
If you are using WINS name resolution, set the address of
the WINS Server where the System Name of the
OkiLAN 6200e will be registered.
Use DHCP to Locate WINS Server
If you are using DHCP for IP address resolution, select
this option to obtain the address of the WINS Server from
the DHCP Server.
Telnet/HTTP Password
Allows you to modify the current password required for
Telnet or HTTP access. The default password is the serial
number of the OkiLAN 6200e.
Set IP Monitor
!
You must install a printer driver before performing
this step. See page 18 for details on how to do this.
1. Click Start ® Settings ® Printers.
2. Right click the OKI C9200 or C9400 printer icon, then
click Properties.
3. Click the Ports tab (Windows 2000/NT 4.0) or Details
tab (Windows Me/98/95).
4. Click Add Port.
5. Select Oki Data OkiNet Connect IP Monitor and
click New Port.
The Add OkiNet Connect Port dialog box appears.
6. Highlight the printer's current IP address in the list of
printers on the Add OkiNet Connect Port screen and
click Add.
7. Click OK.
!
Refer to your OkiLAN 6200e Network User's Guide
for further details.
14

Novell Setup

!
This procedure applies to Novell NetWare 4.0 and 5.0
when using NDS or Bindery only. For further details
and for Novell NDPS instructions, refer to your
OkiLAN 6200e User's Guide.
Install OkiView32
1. With all applications closed and the OKI C Series CD
in your CD-ROM drive, click Start ® Run.
2. Browse to your CD-ROM drive, then double-click
install.exe in the root directory.
3. Click OK.
4. Select the OKI printer model you have, then click
Continue.
5. Click the Network and Admin Software button.
6. Click the OkiView32 button and follow the on-screen
instructions to complete the installation.
!
Selecting "Typical" or "Custom" installs the SNMP
trap utility, which requires a system reboot.
Configure Novell with OkiView32 for Novell
OkiView32 creates the NDS printer objects and
configures the OkiLAN print server.
1. Login as Admin, then run OkiView32 from a Windows
workstation running Novell's NetWare Client.
2. When the printer has been discovered, double-click the
printer, then click on the Network tab and verify that
NetWare is enabled.
3. Click on the Novell tab.
4. Click the NDS tree.
5. Click Modify Name and enter a new print server
name. Click OK.
6. Click Change Context and browse for the appropriate
Tree and Context. Click OK.
7. Click on the context that now appears in the NDS tree.
8. Click Add/Delete Queue and click New Queue.
Enter a name for the new print queue, then click OK.
9. In the Add Queues dialog box, select the newly
created queue, then click OK.
OkiView32 adds the Printer, Print Server, and Print
Queue to the NDS tree and configures the OkiLAN print
server. You must redirect printer drivers installed at
client workstations to a port that corresponds to the
Novell queue.