Oki C9200 Setup Manual page 22

15
USB Install: Macintosh (cont.)
Activate the Duplex Unit and
Internal Hard Drive in the
Printer Driver
If your printer is equipped with the duplex unit (Models
C9200dxn and C9400dxn) or the internal hard disk drive
(Models C9200n, C9200dxn and C9400dxn), you must
enter the driver and activate them before using them.
!
This procedure is also used when installing optional
memory SIMMs or auxiliary paper trays. See
"Accessories" in the on-line C9000 Series Desktop
User's Guide.
1. Activate Chooser from the Apple menu.
2. Select LaserWriter 8.
3. Click Printer ® Setup.
4. Click Configure.
5. Change the Duplex setting to Installed.
6. Change the Hard Disk setting to Installed.
7. Click OK twice.
8. Close Chooser.
22
USB: On-Line Manuals
Requirements
• Microsoft Internet Explorer version 4.0 or higher
To Load the Manuals
!
In order to open the on-line manuals, you must have
your Macintosh set to run .htm extension files under
your browser.
□ Create folders in which to store the C9000 Series
User's Guide and the OkiLAN 6200e Print Server
User's Guide.
□ Place the CD supplied with your printer in your
CD-ROM drive.
□ Copy the files from the CD folder
Manuals\UserGuid\Html\English to the folder you
created for the C9000 Series User's Guide.
□ Copy the readmeMac.htm file from the root directory
on the CD supplied with your printer to the folder you
created for the C9000 Series User's Guide.
□ Copy the files from the CD folder
Manuals\Network\Html\English to the folder you
created for the OkiLAN 6200e Print Server User's
Guide.
To View the Manuals
To view the on-line manuals, go to the folder where you
stored the manual, then double-click the start_e.htm file.