Usb Port Connection - Oki C9200 Setup Manual

11
Network Install: Windows & Novell (cont.)
Activate the Duplex Unit and
Hard Drive in the Driver
If your printer is equipped with the duplex unit (Models
C9200dxn and C9400dxn) or the internal hard disk drive
(Models C9200n, C9200dxn and C9400dxn), you must
enter the driver and activate them before using them.
!
These procedures are also used when installing
optional memory SIMMs, auxiliary paper trays and
High Capacity Feeder. See "Accessories" in the on-
line C9000 Series Desktop User's Guide.
To activate the Duplex Unit and Hard Disk
Drive in the PCL driver:
□ Click Start ® Settings ® Printer.
□ Right click the OKI C9200 or C9400 PCL printer
icon, then click Printing Preferences (Windows
2000), Properties (Windows Me/98/95) or
Document Defaults (Windows NT 4.0).
12
USB Install: Windows
Windows Drivers Supplied
The printer comes with two Windows drivers: Adobe
PostScript and PCL. USB Drivers for the following
Windows systems are supplied:
• Windows 2000 Professional
• Windows Me
• Windows 98

USB Port Connection

!
No USB interface cable is supplied with the printer.
Use a USB cable that is compatible with USB
specification 1.1.
Notes:
• A USB interface will only operate using Windows
2000, Windows Me and Windows 98. It will not
operate using MS-DOS, Windows 95, 3.1, or NT 4.0.
16
□ In the Paper tab, click Device options, then click
Duplex option unit and Printer hard disk to select
them.
□ Click OK twice, then close the Printers dialog box.
To activate the Duplex Unit and Hard Disk
Drive in the PostScript driver:
□ Click Start ® Settings ® Printer.
□ Right click the OKI C9200 or C9400 PostScript
printer icon, then click Properties.
Windows 2000 and NT 4.0:
- Click the Device Settings tab.
- Scroll down to Installable Options.
- Click Duplex, then click Installed in the box
below; do the same thing for Hard Disk.
Windows Me, 98 and 95:
- Click the Device Options tab.
- Click Duplex, then click Installed in the box
below; do the same thing for Hard Disk.
□ Click OK, then close the Printers dialog box.
• Printer operation is not assured if another USB
compatible device is connected concurrently with it.
• If a USB hub is used, it must be connected directly to
the computer.
□ Turn the computer and the printer off.
□ Connect the USB cable to the USB port on the
computer (1).
□ Connect the other end of the cable to the USB port on
the printer (2).
USB
Port