Adding Community Ip Addresses - HP XP20000/XP24000 Reference Manual

4. Select Change Community. The Change Community dialog box displays (see
Community dialog box" (page
5. In the Community text box, overwrite the old community name with a new community name.
You can use up to 180 alphanumeric characters, except for ", \, ;, :, ,, *, ?, <, >, |, /, ^, &,
and %. You can also use spaces, except at the beginning or the end of the name.
6. Select OK. The changed community name displays in Community & Trap, but the changes
are not yet implemented in the storage system.
7. Select Apply. Select OK or Cancel.
Figure 10 Change Community Menu
Figure 1 1 Change Community dialog box

Adding Community IP Addresses

To add a community IP address:
1. Log on to Remote Web Console. Click Go – Environmental Settings – SNMP Information in the
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see "SNMP Information Tab" (page
2. Select and right-click the desired community to display the Add Community menu (see
IP Address Menu" (page
3. Select Add IP Address. The Add IP Address dialog box displays (see
(page 19)).
4. In IP Address, enter a new IP address or select an existing IP address.
18 Performing SNMP Operations
18)).
11)).
19)).
"Change
"Add
"IP Address dialog box"