Supported Traps; Mib Mounting Specifications - HP XP20000/XP24000 Reference Manual

Supported Traps

The following table shows the supported trap types.
Table 1 1 Extension Trap Types
Specific Trap Code
1
2
3
4

MIB Mounting Specifications

The supported MIB mounting specifications are as follows:
mgmt: OBJECT IDENTIFIER ::= {iso(1) org(3) dod(6) internet(1) 2 }
mib-2: OBJECT IDENTIFIER ::= {mgmt 1}
An SNMP agent mounts only system groups in mib-2, as shown in the following table.
Table 12 System Groups
Name
sysDescr
{system 1}
sysObjectID
{system 2}
sysUpTime
{system 3}
sysContact
{system 4}
sysName
{system 5}
sysLocation
{system 6}
sysService
{system 7}
24 SNMP Supported MIB
Trap
RaidEventUserAcute
RaidEventUserSerious
RaidEventUserModerate
RaidEventUserService
Description
Name of hardware or OS.
Object ID indicating the product
identification number.
An accumulated time from an SNMP
agent.
A manager who manages an agent
or a contact address.
A given name for managing an agent.
An agent setup location.
Value indicating a service.
Description
All operations in a storage system
stopped.
Operation in a component where a
failure occurred stopped.
Partial failure.
Minor failure.
Mounted Value
Fixed value
RAID 600
Fixed value. See "Object Identifier
System" (page 22).
1.2.6.1.4.1.1 16.3.1 1.4.1.1
Unit: ms
Maximum 180 characters in an ASCII
characters string (see Note)
Input by a user from an SNMP setting
window.
Maximum 180 characters in an ASCII
characters string (see Note)
Input by a user from an SNMP setting
window.
Maximum 180 characters in an ASCII
characters string (see Note)
Input by a user from an SNMP setting
window.
Fixed value
76 (decimal)