Deleting A Community Name; Changing A Community Name - HP XP20000/XP24000 Reference Manual

Figure 8 Add Community dialog box

Deleting a Community Name

To delete a community name:
1. Change to Modify mode.
2. Log on to open Remote Web Console Main window, click Go – Environmental Settings – SNMP
Information in the menu bar of Remote Web Console Main window. The SNMP Information
window is displayed (see
3. In Community & Trap, select and then right-click the unwanted community. The Delete
Community menu displays (see
4. Select the Delete Community command. A confirmation message displays.
5. Select OK or Cancel. The selected community is deleted from Community & Trap, but the setting
is not yet implemented in the storage system.
6. Select Apply. Select OK or Cancel on the confirmation message.
Figure 9 Delete Community Menu

Changing a Community Name

To change a community name:
1. Change to Modify mode (see the HP StorageWorks XP24000/XP20000 Remote Web Console
User Guide if you need instructions).
2. Log on to Remote Web Console. Click Go – Environmental Settings – SNMP Information in the
menu bar of Remote Web Console Main window. The SNMP Information window is displayed
(see "SNMP Information Tab" (page
3. Select and then right-click the community name that you want to change in Community & Trap.
The Change Community menu displays (see
"SNMP Information Tab" (page
"Delete Community Menu" (page
11)).
"Change Community Menu" (page
11)).
17)).
18)).
Deleting a Community Name 17