Standard Mib Specifications; Supported Mib; Mib Access Mode; Object Identifier System - HP XP20000/XP24000 Reference Manual

Table 9 Failure Report Trap
Name
EventTrapSerialNumber
EventTrapNickname
EventTrapREFCODE
EventTrapPartsID
EventTrapDate
EventTrapTime
EventTrapDescription
NOTE: For example, the object identifier for a failure in a storage system processor would be
1.3.6.1.4.1.1 16.5.1 1.4.1.1.6.1.2.

Standard MIB Specifications

Supported MIB

The following table shows the supported MIBs. If you send a GET request for an object (MIB) that
is not supported, you will receive NoSuchName as a GET RESPONSE.
Table 10 Supported MIBs
MIB
Standard MIB: MIB-II
Extension MIB

MIB Access Mode

The access mode for MIB in all communities is read only. If you send a GET request for a SET
operation, you will receive NoSuchName as a GET RESPONSE.

Object Identifier System

An object system supported by SNMP agent is as follows:
22 SNMP Supported MIB
Object Identifier
1.3.6.1.4.1.1 16.5.1 1.4.2.1
1.3.6.1.4.1.1 16.5.1 1.4.2.2
1.3.6.1.4.1.1 16.5.1 1.4.2.3
1.3.6.1.4.1.1 16.5.1 1.4.2.4
1.3.6.1.4.1.1 16.5.1 1.4.2.5
1.3.6.1.4.1.1 16.5.1 1.4.2.6
1.3.6.1.4.1.1 16.5.1 1.4.2.7
system group
interface group
at group
ip group
icmp group
tcp group
udp group
egp group
snmp group
Type Description
INTEGER The product number of the
device that experienced the
failure.
DisplayString The device nickname.
DisplayString The failure reference
OBJECT The area where the failure
IDENTIFIER occurred (Note).
DisplayString Failure occurrence date.
DisplayString Failure occurrence time.
DisplayString Detailed information about
a failure.
Supported?
Supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Supported