Maintaining The System; Remove Reserve Attribute From A Volume - HP XP P9500 User Manual

3. To change the displaying order, click a column title in the list.
The list will be sorted based on the items in the clicked column.
If there are more than 16,384 records of operations, the list will be divided into multiple
pages and only the list which is currently displayed will be sorted.
If you click the same column title again, you can switch the sorting order (Ascending or
Descending).
4. If the information on the list is not updated, click File and then Refresh. The list will be updated
to the latest information.
For operations involving the copying process, the History window does not display information
about the operations until the copying process starts. If you perform an operation on a pair
before the copying process starts, the History window will not display information about the
operation.
5. If there are many records of operations, click the scroll button. The list scrolls and you will see
the operation history that was not previously displayed.
If you click and drag down the frame border that divides the History window into upper and
lower panes, you can expand the display area of the list.
6. If there are more than 16,384 records of operations, click Next.
The list displays subsequent records of operations.
If you click the Previous button, the list switches to the previous page.
If there are 16,384 or fewer records of operations, you cannot click Previous and Next.
The storage system saves up to 524,288 records of latest operations.

Maintaining the system

Some maintenance tasks are a response to behavior discovered during system monitoring.You can
also change certain settings to keep the system in tune with your changing requirements.
This section provides maintenance information and instructions for the following:
Removing the reserve attribute
Maintaining Business Copy during system maintenance

Remove reserve attribute from a volume

You can remove the S-VOL reserve attribute from a volume.
Prerequisite Information
Before removing the reserve attribute from a volume, ensure that the status is SMPL.
To remove the reserve attribute:
1. In Remote Web Console, click Actions > Local Copy > Business Copy/Snapshot > Pair
Operation.
2. Click
3. In the tree, select the appropriate port or host group for the volumes from which you want to
remove the reserve attribute.
Related volumes display in the volume list. To show only simplex, reserved volumes, click
Display Filter, then do the following:
1. Ensure that the Pair attribute is cleared.
2. Check Reserve.
3. Click OK.
50 Monitoring and maintaining the system
to change to the Modify mode.