Preview List - HP XP P9500 User Manual

Table 24 Volume List (continued)
Field
MU
Status
S-VOL
CTG
SvolMode
Copy Pace
Sync
Emulation
Capacity (MB)
CLPR (P)
CLPR (S)

Preview List

The Preview List shows the operations and changes you have made from the Pair Operation window.
You can review your changes, modify the operation or your changes, and apply them to the storage
system.
The Preview List displays below the Volume List.
Description
The MU number of the Business Copy pair formed with the P-VOL. MU#s are mirror unit
numbers. The storage system assumes the same numbers of P-VOLs as S-VOLs. For example,
when a P-VOL is paired with three S-VOLs, though just one P-VOL exists, the system assumes
that there are three P-VOLs. These "virtual" P-VOLs are mirror units, MUs.
Pair status is displayed.
S-VOL information displays in AAA-BB-CCC(XX:YY:ZZ) format.
AAA is the port ID (cluster and channel number)
BB is the group number of host group
CCC is the LU number
XX:YY:ZZ is the LDKC number:CU number:LDEV number
Only one path is listed, even for LUs with more than one. The path is connected to the first
port configured for the path.
The S-VOL's consistency group number. If no consistency group is set for the S-VOL, dashes
(---) display.
SvolMode. Indicates whether the S-VOL can be written to and/or read, or not.
W indicates S-VOL Write. S-VOL pair status is PSUS(SP) or PSUS, and the host writes
to the S-VOL.
N indicates Hlde Mode: The S-VOL cannot be read in this mode.
If both S-VOL-write and Hlde modes are on, W displays. If both modes are off, a dash (-)
displays.
Indicates the speed that data is copied according to the pair status.
Slower, Medium, or Faster displays if the pair status is COPY(PD), COPY(SP), PSUS(SP),
COPY(RS), or COPY(RS-R).
Dashes (----) display if the pair status is none of the above.
Note: When you create Business Copy pairs by using RAID Manager, the copy pace is
set as follows.
When the track size is 1 or 2, Slower is set.
When the track size is 3, Medium is set.
When the track size is 4 to 15, Faster is set.
Indicates the percentage of pair synchronization, if applicable, according to the following
pair statuses.
For SMPL, PSUE, and SMPL(PD), dashes (----) display.
For COPY(PD), COPY(SP), and PSUS(SP), the percentage of copied data displays.
For PAIR, PSUS, COPY(RS), and COPY(RS-R), the percentage of identical data in the
P-VOL and S-VOL displays.
The volume's emulation type.
The volume's storage capacity displays in megabytes.
The P-VOL's cache logical partition displays.
The S-VOL's cache logical partition displays.
Pair Operation window 67