Create And Verify The Mount Directories - HP Surestore Disk Array 12h - And FC60 Configuration Manual

Create and Verify the Mount Directories

Caution
Example
32
Do not create mount directories for multiplatform devices.
To create and verify the mount directories:
1. Create a mount directory by using the mkdir command. For example, to create a
mount directory for logical unit 0 on the disk array, partition c, enter
mkdir HP5700_LU0c
2. Verify the new mount directories by using the ls –d command.
# ls -d /HP5700*
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
drwxr-xr-x 2 root
:
:
#
3. Repeat steps 1 and 2 for each device on the disk array.
hp surestore disk array xp operating system configuration guide: SGI IRIX
sys 9 May 22 13:53 /disk13
sys 9 Sep 10 1996 /disk4
sys 9 May 22 13:46 /disk412
sys 9 May 22 13:49 /disk413
sys 9 May 22 13:55 /disk48
sys 9 Sep 11 1996 /disk5
sys 9 Oct 10 1996 /disk52
sys 9 Oct 7 1996 /disk53
sys 9 Oct 7 1996 /disk531
sys 9 Sep 13 1996 /disk54
sys 9 Sep 13 1996 /disk541
sys 9 Sep 13 1996 /disk542
sys 9 Sep 18 1996 /disk543