Installation Procedures - HP Surestore Disk Array 12h - And FC60 Configuration Manual

Installation Procedures

14
Installation and configuration of the disk array are composed of the following
activities:
1. (XP256 only) Identify the available SCSI paths (page 15).
2. Prepare the disk array (page 16).
3. (XP256 only) Define the SCSI paths (page 19).
4. Connect the disk array (page 20).
5. Verify new device recognition (page 21).
6. Create the device files (page 23).
7. Partition and label the devices (page 26).
8. Enable command tag queuing (page 29).
9. Create the file systems (page 31).
10. Create and verify the mount directories (page 32).
11. Register, mount, and verify the file systems (page 33).
hp surestore disk array xp operating system configuration guide: SGI IRIX