HP Surestore Disk Array 12h - And FC60 Configuration Manual page 74

R&S
RAID
RAID Group
RAM
RC
RCP
RCU
remote instance
RISC
RM
RMC
RM instance
configuration file
R-SIM
R/W, r/w
S/390
SAM
script file
SCSI
sec.
seq.
SGI
shell script
Sidefile
SIM
SMIT
SMS
74
Russel & Stoll.
Redundant array of inexpensive disks.
A RAID group is a mode of disk operation and configuration. RAID groups 1 to 5 vary
in the number of bits used in data/parity encoding, mirroring, and striping features.
You may occasionally see the term parity group used synonymously with RAID group.
Random access memory.
Reference code, or HP Surestore Remote Control XP software.
Remote control port.
Remote control unit.
The instance to which the local instance communicates, as configured in the
HORCM_INST section of the RM instance configuration file.
Reduced instruction set computer.
HP Surestore RAID Manager XP.
Remote console.
A file that defines the link between a volume and an RM instance. This file consists of
four sections: HORCM_MON, HORCM_CMD, HORCM_DEV, and
HORCM_INST.
Remote service information message.
Read/write.
IBM System/390 architecture.
System Administration Manager.
A file containing a shell script.
Small computer system interface.
Second.
Sequential.
Silicon Graphics Incorporated.
A command sequence executed by a UNIX shell.
An area of XP256 cache used to store the data sequence number, record location,
record length, and queued control information before transmit over the ESCON link.
Service information message.
System Management Interface Tool.
System managed storage.
hp surestore disk array xp operating system configuration guide: SGI IRIX