Connecting Power - HP Surestore 80ex - Optical Jukebox User Manual

Connecting Power

1. Ensure that the mailslot shipping bracket and the shipping screw are removed
2. Ensure that your host computer and your jukebox are OFF.
3. Plug the socket end of the power cord into the power port on the rear of the
4. Plug the other end of the power cord into an electrical outlet.
5. Press the power switch (see "3" on Figure 1-1).
6. Initially, TESTING appears in the display window on the front of the jukebox.
NOTE
If FAIL 1 displays, the poweron test was not successful. Ensure that the shipping
screw is removed (see page 1-7). If the shipping screw was removed, refer to
"Troubleshooting" in Chapter 3.
Chapter 1
(see Figures 1-2 and 1-3).
The jukebox power switch is OFF when it is OUT.
jukebox (see "1" on Figure 1-1). Use the power cord supplied with the jukebox.
Once the poweron test completes (approximately 1.5 minutes), READY displays.
(See "Understanding Display Window Messages" in Chapter 3 for additional
information about the displayed messages.
Setting up the Jukebox
Connecting Power
1-11