Setting Up the Jukebox
Overview of This Chapter
Overview of This Chapter
This chapter gives information about the following topics:
•
right side panel features
connecting SCSI and power cords
•
moving or shipping the jukebox
•
connecting SCSI and power cords
What you need to set up the jukebox
Items included with the jukebox:
•
power cord
•
single-ended and differential SCSI terminators
- one of each included in a 4- or 6-drive jukebox
- two of each included in a 10-drive jukebox
- this guide
Items needed but not included with the jukebox:
•
SCSI cable with either a high-density 50-pin (Micro D) or high-density 68-pin
(Micro D) connector depending on whether a single-ended or differential
interface is used
•
single-ended or differential SCSI host adapter with at least one available
address. If you have a 10-drive jukebox you may choose to use two adapters.
•
application software that supports this type of jukebox
1-2
Chapter 1
Need help?
Do you have a question about the Surestore 1200ex - Optical Jukebox and is the answer not in the manual?