Saving And Editing Your Customer Information - HP StoreVirtual 4000 User Manual

NOTE: Record the host name or IP address of the storage system along with the feature key. This
record will make it easier to add the license key to the correct storage system when you receive
it.
Entering license keys
When you receive the license keys, add them to the storage systems in the Feature Registration
window.
1. In the navigation window, select the management group.
2. Select the Registration tab.
3. Click Registration Tasks, and select Feature Registration from the menu.
4. Do one of the following.
To enter a license key for one storage system in the
management group
a. Select a storage system, and click Edit License Key.
b. Copy and paste the appropriate license key for that
storage system into the window.
NOTE:
into the window, ensure that there are no leading or
trailing spaces in the box. Such spaces prevent the
license key from being recognized.
c. Click OK.
The license key appears in the Feature Registration
window.
d. Click OK again to exit the Feature Registration
window.
Saving license key information
For record-keeping, save the license information to a .txt file when you have entered all the license
keys.
1. Click Registration Tasks on the management group Registration tab.
2. Select Save Information to File from the menu.
3. Navigate to the location where you want to save the license key information.
4. Enter a name for the registration information file, and click Save.

Saving and editing your customer information

Save your customer profile, registrations, and licensing information as a text file. Then, if you lose
a storage system, the information can help you rebuild a new storage system.
When you cut and paste the license key
To enter license keys for multiple storage systems in the
management group
a. Click Import License Keys.
b. Click Browse to navigate to the license key files you
downloaded from https://webware.hp.com.
c. Select each .dat file that corresponds to the storage
systems in the management group, and click Open.
Each license key is in a separate .dat file. The file
name has the storage system's feature key in the file
name, as follows:
xxxxxxxxxxxx_xxxxxxx_AA.BB.CC.DD.EE.FF_x.dat.
Be sure the AA.BB.CC.DD.EE.FF part of each file
name matches the feature key of a storage system.
If an error message appears, the error text describes
the problem.
d. Click Apply License Keys.
e. Check the Import Summary window for any errors.
The error messages explain the problem. A green
check mark shows the license key has been applied.
f. Click Close.
If the import process had errors, you return to the
Import License Key window. Click Browse to select
a different license key file. If you click Cancel to exit
the window, any license keys with a green check
mark were applied. If the import process completed
successfully, click Close to exit the window.
Saving and editing your customer information 231