Saving Pair Status Information Into A Text File - HP StorageWorks P9000 User Manual

Set: Applies the settings in the Display Filter dialog box to the list.
Cancel: Discards the settings and closes the dialog box.

Saving pair status information into a text file

You can use the export function only while the client file access is enabled. When the client file
access is not enabled, the Export is not available on the Pair Operation window. For the further
information of the client file access settings, see HP StorageWorks P9000 Remote Web Console
User Guide. The following information for pair status is displayed in the exported file:
Item
Vol
Status
Sub
JNL
Mr
S/N(LDKC)
CNTL
Vol
JNL
Type
ErrLv
Sync
CLPR
Copy Time
An LDEV number ending with # indicates the volume is an external volume. For detailed information
about external volumes, see HP StorageWorks P9000 External Storage for Open and Mainframe
Systems User Guide.
"00" appears as the LDKC number when the volume is a volume of the XP12000/XP10000 Disk
Array and the XP24000/XP20000 Disk Array.
To save information about pairs in a text file
1. If necessary, filter information in the list in the Pair Operation window.
2. In the Pair Operation window, click Export. A message appears and asks whether to save
volume pair information in a file.
3. Click OK to close the message.
A dialog box appears and prompts you to save a file.
Descriptions
Volume in the local storage system.
The LDKC number, the CU number, and the LDEV number
Status of the pair
Sub status (i.e., consistency status) of the pair
Journal number in the local storage system
Mirror ID
Serial number of the remote storage system
Controller ID and model name of the remote storage system
Volume in the remote storage system.
The number to the left of the colon (:) is a CU number.
The number to the right of the colon is an LDEV number.
Journal number in the remote storage system.
Type of volumes in the local storage system
P-VOL: primary data volume
S-VOL: secondary data volume
Error level
Progress of copy operation. Or, synchronization rate (i.e., concordance rate) between the data
volume before the pair was split and the data volume after the pair was split.
CLPR number and CLPR name
Copy time.
Monitor pair activity, status 87