HP StoreVirtual 4000 User Manual page 20

Table 3 CMC setup for remote support
Task
Enable SNMP on each storage system
Set the SNMP trap recipient to IP address of the system
where the remote support client is installed
Open port 8959 (used for the CLI)
Set the management group login and password for a
read-only (View_Only_Administrator group) user
20 Getting started
For more information, see
"Enabling SNMP agents" (page 92)
"Adding SNMP traps" (page 93)
Your network administrator
"Adding an administrative user" (page 76)