HP StoreVirtual 4000 User Manual page 256

Table 77 TCP/UDP ports used for normal SAN operations with SAN/iQ (continued)
IP Protocol
TCP
TCP
TCP
TCP, HTTP/HTTPS
TCP
TCP, UDP
TCP, UDP
UDP
TCP
UDP
TCP
TCP
SSH
TCP
256 SAN/iQ TCP and UDP port usage
Port(s)
13847
13848
13849
2003, 5988, 5989
13990 - 13999
13891, 13893
NOTE: Port 13893 is UDP
only.
13888, 13889
NOTE: Port 13889 is UDP
only.
14000 – 140xx
13887, 13892
13947
4443
2301, 2302, 2381, 2382
16022
1 1 120
Name
SAN/iQ Internal
SAN/iQ Internal
iSCSI
CIM Server
CIM
SAN/iQ Database
SAN/iQ Control
SAN/iQ Internal
Failover Manager
Failover Manager
SAN/iQ Diagnostics
HP System Insight Manager
SAN/iQ Upgrade
Description
Used for Virtual Manager
communication
Used for internal data
distribution and
resynchronization.
iSCSI initiators connect to
this port when using the HP
LeftHand DSM for Microsoft
MPIO.
Used for HTTP requests to
the CIM gateway. Outgoing
from management
applications. Incoming to
storage systems. Used for
management control. Ports
used for Performance
Dashboard, Global Config
request to Mgmt Gateway.
Ports for CMC notifications
for Alarms Events from Mgmt
Gateway.
Used for heart-beating and
distributing configuration
changes between
management nodes.
Used for internal control
communication.
Used as iSCSI targets where
xx is the number of initiators
Communication to and from
the Failover Manager, when
applicable.
Communication to and from
the Failover Manager, when
applicable.
Used by the SAN/iQ
Diagnostic tool -DiagiQ that
is run by HP LeftHand
Support to get advanced
diagnostics information
using a web interface.
Used by HP System Insight
Manager to display
configuration information of
HP platforms like DL380 and
DL320s using a web
interface.
Ports used for connecting to
the CLI.
Incoming to storage systems.
Used for upgrading the
storage systems. Not