5 Preparing for installation
The customer should ensure that a keyboard and monitor are available for use as a management
console during the initial configuration stage.
NOTE:
HP does not recommend using a KVM installed in the rack because this will cause problems
when a second couplet is added. In a fully expanded rack there is no space for locating a KVM
within the rack.
The customer should also complete the checklists in the rest of this document and present them to
the HP service engineers when they arrive to install and configure the system.
All other tools are provided by the HP service specialist.
Related information
The following HP StoreOnce B6000 Backup System documentation is available.
HP StoreOnce B6000 Backup System User Guide
HP StoreOnce B6000 CLI Reference Guide
HP StoreOnce B6000 Backup System Best Practices Guide
HP StoreOnce Backup System Concepts Guide (valid for all generations of Backup System)
HP StoreOnce B6000 Software Release Notes
To locate the B6000 Backup System documents, go to http://www.hp.com/go/storeonce, and
then click the support link.
18
Preparing for installation