Warnings And Cautions - HP StoreOnce B6000 Series Planning And Preparation Manual

Warnings and cautions

The customer is not normally expected to unpack and handle the product. However, should this
prove necessary, care must be taken to avoid damage to people and equipment. For this reason,
safety and handling instructions are included below. Be sure to read them if you need to move or
unpack the product. You should also read the Safety Booklet on Documentation CD that is supplied
with your product.
WARNING!
equipment be sure that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple-rack installations.
Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
WARNING!
At least two people are needed to safely unload a rack from a pallet. The weight of an HP
B6000 rack can be between that of a Single Couplet Rack (345 kg) and a fully configured
2 Couplet rack (1297 kg). It can stand more than 2.1 m (7 ft) tall, and may become unstable
when being moved on its casters.
Never stand in front of a rack when it is rolling down the ramp from the pallet. Always handle
a rack from both sides.
To reduce the risk of personal injury or damage to the equipment, before installing
To reduce the risk of personal injury or equipment damage when unloading a rack:
Warnings and cautions 5