Launch In Context Profile; Lic Names - Brocade Communications Systems StoreFabric SN6500B Developer's Manual

3

Launch In Context profile

NOTE
The HBA is represented by the PortController class and the serial number is the key.

Launch In Context profile

Brocade Network Advisor supports a number of services for network management, such as
Configure Names, Historical Performance Report, Fabric Ports Report, and so on. These services
are published through the Launch In Context (LIC) profile.

LIC names

Table 11
TABLE 11
LIC name
About
CEE_CEE_Configuration
CEE_QoS_Configuration
Discovery
Discovery_Host_Adapters
Fabric_TopNTalkers_Report
Fabric_Switch_Ports_Report
Fabric_Switch_Configuration_Backup
Fabric_Switch_Configuration_Restore
Fabric_Switch_Software_Update
Fabric_Switch_SupportSave
Fabric_Switch_Threshold_Policies
Fabric_Device_Connectivity_Diagnostics
52
shows the list of LIC names and their descriptions.
Description of LIC names
Description
Displays the product and version information.
Configures CEE parameters for QoS (ETS, PFC),
LAG groups, LLDP, DCBX, ACL, STP, 802.1X
authentication.
Configures QoS parameters on CEE switches.
Allows discovering the fabrics and hosts.
Discovers groups of Brocade host adapters.
Displays the historical performance report for the
top talkers that are using the most bandwidth on
the selected fabric.
Displays the port details report for all the
discovered ports in the given fabric. The port detail
includes switch information, connected device
information, and so on.
Backs up the switch configuration from one or
more switches.
Restores the switch configuration for one or more
switches.
Downloads firmware to one or more switches.
Captures supportSave information from one or
more selected switches and hosts. Also, ability to
schedule later to capture the supportSave
information from one or more switches.
Configures threshold policies on E_Ports and
F_Ports or FL_Ports for the Tx and Rx percentage
utilization measures. Sends an appropriate alert to
notify when the threshold is exceeded.
Identifies the problems preventing communication
between the two selected device ports from the
same fabric or from two different fabrics.
Brocade Network Advisor SMI Agent Developer's Guide
53-1002701-01