Brocade Communications Systems StoreFabric SN6500B Developer's Manual page 158

4
Alert indications
TABLE 14
Message ID
BRCD101
BRCD102
NOTE
For indications from BRCD61 to BRCD76:
All CEE alert indications and life-cycle indications are only applicable for FOS switches (Brocade
8000 switch and FCOE10-24 blade) with versions from v6.4.0. To get all CEE indications, make sure
that CEE indication is enabled in the switch.
144
Supported alert indications (Continued)
Trigger
Fabric principal switch WWN changed.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD101
SAN zone activation error. This alert
indication is delivered for each fabric
failure.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity= BROCADE and
MessageID=BRCD102
NOTE: This indication is delivered only if
the operation is done through
Brocade Network Advisor SMI
Agent.
Property
AlertingManagedElement
AlertingElementFormat
AlertType
OtherAlertType
AlertSubType
PerceivedSeverity
ProbableCause
SystemCreationClassName
SystemName
ProviderName
OwningEntity
Message
MessageArguments
AlertingManagedElement
AlertingElementFormat
AlertType
OtherAlertType
AlertSubType
PerceivedSeverity
ProbableCause
SystemCreationClassName
SystemName
ProviderName
OwningEntity
Message
MessageArguments
Brocade Network Advisor SMI Agent Developer's Guide
Value
COP of Brocade_Fabric
COP
Device Alert
N/A
Principal switch WWN
changed
2 (Informational)
123
Brocade_Fabric
Fabric WWN
Brocade_AlertIndication
Provider
BROCADE
Principal switch <WWN>
changed to <WWN>
old principal switch WWN
new principal switch
WWN
COP of Brocade_Switch
COP
Other
Zone alert
SANZone activation
failed
5 (Major)
123
Brocade_Fabric
Fabric WWN
Brocade_AlertIndication
Provider
Brocade
SANZone activation
failed for fabric <WWN>
Fabric WWN
53-1002701-01