Branch Circuit Requirements - HP StorageWorks XP512 - Disk Array Manual

87Ã 
87Ã 

Branch Circuit Requirements

52
High leakage current may occur between the power supply and the unit. To
avoid an electrical shock, be sure to perform the protective earth connection
before the supply connections are made.
To protect your disk array, your building must be wired correctly. Each line
(R/S/T line) should be protected by a short circuit protective device and by
an overcurrent protective device rated 30 amp on building installation.
The protective devices on building installation shall be comply with
national standards of the country where the units shall be installed, and if a
protective device interrupts a conductor, it shall also interrupt all other
supply conductors.
/
/
/
*
HP SureStore E Disk Array XP512: Site Prep Guide