B Specifications; Mechanical Specifications; Electrical Specifications; System Heat And Power Specifications - HP XP P9500 Owner's Manual

B Specifications

Mechanical specifications

The following table lists the mechanical specifications of the P9500 disk array.
Table 27 P9500 mechanical specifications
Dimension
Width (inches / mm)
Depth (inches / mm)
Height (inches / mm)
System
Weight
Rack
Weight

Electrical specifications

The P9500 supports single-phase and three-phase power. Power consumption and heat dissipation
is independent of input power.
"System heat and power specifications" (page 80)
"System components heat and power specifications " (page 81)
specifications.
"AC power - PDU options" (page 82)
phase power.

System heat and power specifications

Table 28 System heat and power specifications
Heat Dissipation
and Power
Consumption
Specifications
(Maximum
configuration)
1
Heat (KW, BTU, Kcal) and Power (kVA) values are for determining load for site planning. Actual heat generation
and power demand may be less.
2
Calculated values with drives at a typical I/O condition. (Random Read and Write, 50 IOPSs for HDD, 2500 IOPSs
for SSD, Data Length: 8Kbytes). These values may increase for future compatible drives.
80 Specifications
Downloaded from www.Manualslib.com
Single Rack
24.0 / 610
45 / 1 145
79 / 2006
Min (lbs / kg) 1 120 / 508 (Diskless)
Max (lbs / kg) 1558 / 707
(lbs / kg) 292.6 / 133
1, 2
Parameter
DKC Module-0
Max Power 5.87
consumption (kVA)
Max Heat 5.57
dissipation (kW)
Max BTUs per 19012
hour
Max Kcal per hour 4791
manuals search engine
Single Module
(3 racks)
71.3 / 1810
45 / 1 145
79 / 2006
3750 / 1701
4319 / 1959
Rack Weight is included in system weight
lists system heat and power specifications.
lists the PDU specifications for both single phase and three
DKC Module-1
5.42
5.15
17571
4428
Dual Module
(6 racks)
142 / 3610
45 / 1 145
79 / 2006
7500 / 3402
8560 / 3883
lists component heat and power
Full Array (DKC-0
plus DKC-1 plus
DKU Rack DKU x4)
5.45 33.1
5.17 31.4
17643 107155
4446 27002