Entering The Access Point's Wireless Lan Settings Directly On The Machine - Canon PIXMA MX420 Network Setup Troubleshooting

• To enter characters assigned to the same key successively (e.g., enter "N" then "O"), press the ]
button (B) to move the cursor by one character to the right first.
• To insert a space, move the cursor to the target position using the [ or ] button, then press the left
FUNCTION button (C).
• To insert characters, move the cursor to the character on the right of the target position using the [ or
] button, then enter characters.
• To delete a character, move the cursor to the target character using the [ or ] button, then press the
right FUNCTION button (D).
<Key Assignments>
Button Numeric mode 123
1 1
2 2 ABC
3 3 DEF
4 4 GHI
5 5 JKL
6 6 MNO
7 7 PQRS
8 8 TUV
9 9 WXYZ
0 0
- . SP # ! " , ; : ^ ` _ = / | ´ ? $ @ % & + ( ) [ ] { } < > \ ~
#
Each time you press this button, the entry mode changes between numeric mode 123, upper
case mode ABC and lower case mode abc.
SP: Indicates a single space.
Upper case mode ABC Lower case mode abc
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Entering the Access Point's Wireless LAN Settings Directly on the
Machine
Action
Enter the access point name/network name (SSID) and security setting (WEP, WPA,
etc.) on the machine directly.
Follow the procedure below.
1
Press the Setup button.
2
Use the [ or ] button to select Wireless LAN setup,
then press the OK button.
3
Use the { or } button to select Yes, then press the
OK button.
• When wireless connection is enabled, the Wi-Fi lamp lights
blue.
4
Select Other setup, then press the OK button.