Download Print this page

Canon PIXMA MX420 Network Setup Manual

Getting your multifunction back on your network after a router or network change windows & mac os
Hide thumbs

Advertisement

Next >>
<< Previous
Getting Your Multifunction
Back On Your Network
After A Router Or Network Change
PIXMA MX420
Windows & Mac OS
1

Advertisement

loading

  Related Manuals for Canon PIXMA MX420

  Summary of Contents for Canon PIXMA MX420

  • Page 1 Next >> << Previous Getting Your Multifunction Back On Your Network After A Router Or Network Change PIXMA MX420 Windows & Mac OS...
  • Page 2 << Previous Next >> If any of the following situations exist • You have replaced your Router or Access Point • You want to use a different wireless network • Router settings have been changed. Please complete the following steps to apply the new configuration settings to your multifunction.
  • Page 3: Network Requirements

    Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.
  • Page 4 Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Notes on Network Connection •...
  • Page 5 Per-Shared key. A password required to access the wireless network If you do not know your Access Point/Network Name or your Network Key, use the following links for information on using our Canon PIXMA Wireless Setup Assistant. • Windows Users Click Here •...
  • Page 6: Adding Your Multifunction To Your Network

    Adding Your Multifunction to Your Network << Previous Next >> Adding Your Multifunction to Your Network Step One Step Two Press the Setup button (A) Select Wireless LAN setup, and then press the OK button.
  • Page 7 Adding Your Multifunction to Your Network << Previous Next >> Step Three Step Four Select Yes, then press the OK button. Select Easy setup, and then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue.
  • Page 8 Adding Your Multifunction to Your Network << Previous Next >> Step Five Step Six Select the access point name, then press the OK button. When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the following screen is not displayed, go to step 8 NOTE: If you are living in an apartment, nearby access Press the...
  • Page 9 Adding Your Multifunction to Your Network << Previous Step Seven Step Eight Make sure that the network key is correct, and then When the connected to the access point screen appears, press the press the OK button. OK button. The Setup menu screen returns. Your MX420 is now connected to your network Note: •...