Uninstalling The Product; Upgrading The Product; Configuration; Configure The Nodes - Dell PowerEdge UPS 500T User Manual

x
A service called « Dell Multi UPS Management Console » is also created for the Database
Acquisition Engine.
This program continuously polls the status of Dell devices and Applications connected on the
network.
This service automatically starts on machine boot up.
This service provides the Web Interface.
x
A systray displays the alarms on the local computer.

2.4. UNINSTALLING THE PRODUCT

x
From the Add/Remove programs item of the control panel, execute the "Dell Multi UPS
Management Console Vx.xx" package.
x
You can also uninstall from the shortcuts:
Start Æ Programs File Æ Dell Æ Multi UPS Management Console Æ Uninstall Dell Multi
UPS Management Console.
This will remove the database and the custom files if you confirm it.

2.5. UPGRADING THE PRODUCT

Please refer to the Checking for Upgrades Paragraph.

3. CONFIGURATION

3.1. CONFIGURE THE NODES

Each node (Dell UPS Management Card / Application must have a valid IP
address (or a DNS name) in the range that you have entered for auto
discovery.
Refer to the compatibility list.
"Dell Multi UPS Management Console" automatically receives the alarms
(through notification or polling) without specific configuration on the card,
proxies, Applications.
For SNMP acquisition, check the community name.
Default community name is configured in Settings Æ System Æ Default
Community Name
A specific community name can be defined for each IP range in Settings Æ
Auto Discovery Æ Range Scan Æ Password
Dell MUMC – User Guide
P 164000119 Rev 0.03
Dell Multi UPS Management Console
USER GUIDE
Dell.com
5