Nodes Events List - Dell PowerEdge UPS 500T User Manual

4.7.3. NODES EVENTS LIST

The icons in the different views represent the event severity.
Icon Event status
Normal. With this event, the device is coming back to a normal status.
Event list (UPSs, Applications, Generic devices):
x
Communication with device is restored
x
Communication restored with UPS
x
The system is powered by the utility
x
The UPS output is on
x
Communication restored with UPS
x
Battery OK
x
UPS returns to normal load
x
UPS OK
x
Bypass : Return on UPS
x
End of low battery alarm
x
The outlet group 1 is on
x
The outlet group 2 is on
x
Communication failure with environment sensor
x
Communication restored with environment sensor
x
Humidity is in normal range
x
Temperature is in normal range
x
Input #x on
x
Input #x off
x
End of warning alarm
x
End of critical alarm
x
Redundancy restored
x
Protection restored
Warning. A problem occurred on the device. Your application is still protected.
Event list (UPSs, Applications, Generic devices):
x
The system is powered by the UPS battery
x
Output on automatic bypass
x
Output on manual bypass
x
Humidity is below low threshold
x
Humidity is above high threshold
x
Temperature is below low threshold
x
Temperature is above high threshold
x
Warning Alarm
x
The device is under its load alarm threshold
x
The device is over its load alarm threshold
x
Protection lost
x
Redundancy lost
x
Shutdown in {time}
Critical. A serious problem occurred on the device. This problem requires an urgent action.
Your application might NOT BE powered anymore.
Event list (UPSs, Applications, Generic devices):
Dell MUMC – User Guide
P 164000119 Rev 0.03
Dell Multi UPS Management Console
(a generic Warning alarm is active on the device)
USER GUIDE
Dell.com
25