Status - Dell PowerEdge UPS 500T User Manual

The following node information is displayed in this panel:
x
166.99.xx.yy
x
Description
x
Nominal apparent Power
x
IP address
x
Mac address
x
Serial Number the device serial number (if available)
x
Class
x
Location
x
Contact
x
Link
Note: The information displayed in this panel depends on the node capabilities.

4.4.2. STATUS

x
Power source
x
Battery state
x
Load Level
x
Battery capacity
x
Battery run time
x
Master Output
Bypass/Manual By Pass/Overload)
x
Outlet #x
Note: The information displayed in this panel depends on the node capabilities.
Outlets color codes:
Symbol Color
Green
Red
Dell MUMC – User Guide
P 164000119 Rev 0.03
the DNS name (or IP address) is displayed near the "status icon"
the commercial product name
the device load capacity in VA
the device IP address
the device MAC address
the type of the card
the device location (value of syslocation object or can also be configured in
the Device page )
the device contact (value of syscontact object or can also be configured in
the Device page )
link to the device Web site (if available)
AC Power / Battery
charging / Discharging / Default / Floating / Resting
the output load level of the device
battery capacity of the device
the device remaining backup time
main output status (ON/OFF/Internal Failure/On Automatic
output outlet status (ON/OFF)
Description
Powered (On)
Not powered (Off)
Dell Multi UPS Management Console
USER GUIDE
Dell.com
15