The Source LDEV section displays the current usage rate for the source volume's parity group
and an estimated usage rate for the parity group after the proposed migration plan.
The Target (Reserved) LDEV section displays the current usage rate for the target volume's
parity group and an estimated usage rate for the parity group after the proposed migration
plan.
The line graph illustrates the past usage rates of the source volume and the target volume.
10. If the estimate shows acceptable disk performance, click Close and go to the next step. If not,
restart at the beginning of this task and select a different source and/or target volume.
1 1. Click Set to add the new migration plan.
12. Click Apply to apply the settings to the storage system.
The migration process starts and the % column displays the progress. A completed migration
plan disappears from the list.
Deleting a manual migration plan
There may be an occasion when you want to delete a manual migration plan.
Procedure 2 To delete a manual migration plan:
1.
Click Actions Other Function Auto LUN to open the Auto LUN window.
2.
Click
3.
In the Auto LUN window, click Auto LUN. A different window appears.
4.
Click the Manual Plan tab to display the
5.
Select a manual migration plan and click Delete.
6.
Click Apply.
to change to Modify mode.
"Manual Migration window" (page
Deleting a manual migration plan
47).
23