HP StorageWorks P9000 - Disk Arrays User Manual page 53

The following Auto LUN operations may be performed with the Auto Plan window:
"Setting up auto migration plan parameters" (page 24)
"Deleting auto migration plans" (page 25)
"Recreating auto migration plans " (page 25)
"Stopping the Auto Migration function" (page 26)
The Auto Plan window contains Auto Migration Plans and Auto Plan Parameters sections and is
used to set up, configure, and manage Auto Migration. The following table describes all fields,
options, and buttons on this window.
Item Type
Auto Migration Plans section
Auto Migration field
Migration Status field
Plan Creation field
Next Migration field
Auto Refresh option buttons
Make New Plan button
Delete button
Delete All button
% field
Description
The value in this field is either Enable or Disable and indicates whether
or not the Auto Migration function is enabled.
Indicates the status of the auto migration plans. This field can have
the following values:
Not planned yet: the auto migration plans have yet to be created.
Not performed yet: the auto migration plans have been created
but have yet to be executed.
Failed to make a plan: Auto LUN has failed to create the auto
migration plans.
Under migration: Auto LUN is executing auto migration plans.
Last migration has been canceled: Auto LUN has canceled the last
auto migration plan.
A timestamp indicating when the auto migration plans were created.
A timestamp indicating when Auto LUN will perform the next auto
migration operations.
The possible values for Auto Refresh are Enable and Disable. If Auto
Refresh is enabled, the progress of migration plans are updated in
real time, and if a new plan is created, the new plan will automatically
be added to the list. If Auto Refresh is disabled, information in the list
will not be updated automatically.
NOTE: The time values displayed on this window are retrieved from
the SVP, and may not correspond to the time displayed on the Remote
Web Console web client.
Discards the existing auto migration plans and then creates new auto
migration plans.
Deletes the auto migration plan selected in the list and all auto
migration plans below the selected plan in the list.
Deletes all auto migration plans in the list.
Indicates the progress of the auto migration plans. A hyphen appears
if Auto LUN has yet to execute the auto migration plans.
Auto Plan window 53