HP StorageWorks P9000 - Disk Arrays User Manual page 11

Table 1 Candidates for Source and Target Volumes by Program Product (continued)
Program Product
Continuous Access
Synchronous
Continuous Access
Synchronous Z
Continuous Access Journal
and Continuous Access
Journal Z
Continuous Access Journal
Continuous Access Journal
Z
Compatible XRC
Snapshot
Volume Type/Status
A volume in PSUS, PSUE, or
PAIR status
Deleted pair volumes from
MCU
Deleted S-VOL from MCU
Deleted P-VOL from RCU
A volume in suspended,
simplex, or duplex status
An external M-VOL
An external R-VOL
A data volume pair
A journal volume
A primary volume in any
status
A secondary volume in PSUS
status
A volume in COPY or PAIR
status
A primary volume in any
status
A secondary volume in
suspend status
A volume in Pending Duplex
or Duplex status
A normal volume
A virtual volume
A pool volume
SS pair volumes
P-VOL
S-VOL
Source Volume Candidate?
Yes
Yes, if volumes are in SMPL
status
Yes, if volume is in SMPL
status
Yes, if volume is in SMPL
status
Yes
Yes, if volume is in
suspended status
Yes, if volume is in simplex
status
Yes.
NOTE: The target volume
must be in the same CLPR.
No
Yes.
NOTE: The target volume
must be in the same CLPR.
Yes.
NOTE: The target volume
must be in the same CLPR.
No
Yes.
NOTE: The target volume
must be in the same CLPR.
Yes.
NOTE: The target volume
must be in the same CLPR.
No
No
No
No
Yes
Yes, if in PAIR status
No
Supported and prohibited source and target volumes
Target Volume Candidate?
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes, but only if the volume is
in suspended status
No
No
No
No
No
1 1