Dell PowerEdge T620 Owner's Manual page 142

Error Code Message Information
LCD Message
Details
Action
PSU0016
Message
LCD Message
Details
Action
PSU0031
Message
LCD Message Cannot communicate with PSU <
Details
Action
PSU0032
Message The temperature for power supply <
Details System performance may be degraded.
Action Check the system operating environment, including airflow and inlet temperature. Check
system logs for temperature and thermal component failures.
PSU0033
Message
LCD Message PSU <
Details
Action
PSU0034
Message
LCD Message An under voltage fault detected on PSU <
Details
Action
142
Power supply < number > is incorrectly configured. Check PSU.
Power supplies should be of the same input type and power rating.
Install matched power supplies and review proper configuration in this manual.
number > is absent.
Power supply <
number > is absent. Check PSU.
PSU <
The power supply has been removed or has failed.
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for damage.
3. If the issue persists, see
Cannot communicate with power supply <
The power supply may operate, however power supply monitoring is degraded. System
performance may be degraded.
Remove and reinstall the power supply. If the issue persists, see
The temperature for power supply <
number > temperature outside of range. Check PSU.
System performance may be degraded.
Check the system operating environment, including airflow and inlet temperature.
Check system logs for temperature and thermal component failures.
An under voltage fault detected on power supply <
This failure may be the result of an electrical issue with cables or subsystem
components in the system.
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for damage.
3. If the issue persists, see
Getting Help.
number >.
number >. Re-seat PSU.
number > is in a warning range.
number > is outside of the allowable range.
number >.
number >. Check power source.
Getting Help.
Getting Help.