Dell PowerEdge T620 Owner's Manual page 137

Error Code Message Information
CPU0703
Message
LCD Message CPU bus initialization error detected. Power cycle system.
Details
Action
CPU0704
Message
LCD Message CPU <
Details
Action
FAN0000
Message
Details
Action
FAN0001
Message
LCD Message
Details
Action
FAN1201
Message
LCD Message
4. Reapply input power and turn on the system.
5. If the issue persists, see
CPU bus initialization error detected.
System event log and operating system logs may indicate that the exception is external
to the processor.
1. Check system and operating system logs for exceptions. If no exceptions are
found, continue.
2. Turn off the system and remove input power for one minute.
3. Ensure the processor is seated correctly.
4. Reapply input power and turn on the system.
5. If the issue persists, see
number > machine check error detected.
CPU <
number > machine check error detected. Power cycle system.
System event log and operating system logs may indicate that the exception is external
to the processor.
1. Check system and operating system logs for exceptions. If no exceptions are
found, continue.
2. Turn off the system and remove input power for one minute.
3. Ensure the processor is seated correctly.
4. Reapply input power and turn on the system.
5. If the issue persists, see
number > RPM is less than the lower warning threshold.
Fan <
Fan operating speed is out of range.
Remove and reinstall the fan. If the issue persists, see
number > RPM is less than the lower critical threshold.
Fan <
number > RPM is outside of range. Check fan.
Fan <
Fan operating speed is out of range.
Remove and reinstall the fan. If the issue persists, see
Fan redundancy is lost.
Fan redundancy is lost. Check fans.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
137