Figure 3-5. Removing and Installing the System Cover
5
4
1
cover release latch lock
3
hook slot
5
foot (4)
Installing the System Cover
1 Ensure that all internal cables are connected and folded out of the way.
2 Ensure that no tools or extra parts are left inside the system.
3 Ensure that the cover release latch is in the up (open) position.
4 Align the metal hooks on the cover with the hook slots on the system
chassis, then lower the cover until the cover is flush with the system (see
Figure 3-5).
5 Rotate the cover release latch towards the front of the system, then press
the latch into place to secure the cover.
1
3
2
system cover
4
cover release latch
Installing System Components
2
67