Front Bezel Inserts; Removing A Front Bezel Insert - Dell PowerEdge T300 Series Hardware Owner's Manual

Front Bezel Inserts

Removing a Front Bezel Insert

NOTE:
Before installing a drive in one or more of the front drive bays, first remove
the corresponding insert(s) on the front bezel.
NOTE:
Bezel inserts may contain screws on the inside. You can attach the screws
to new drives, as needed.
1 Remove the front bezel (see "Removing the Front Bezel" on page 63).
2 Press inward on one of the insert tabs, then pull the insert away from the
bezel from the back of the bezel. See Figure 3-4.
Figure 3-4. Removing and Installing the Front Bezel Insert
1 front bezel
3 tab notch
5 screws
5
4
1
2
3
2 front bezel insert
4 insert tab
Installing System Components
65