Memory Information Screen - Dell PowerEdge T300 Series Hardware Owner's Manual

Table 2-2. System Setup Program Options (continued)
Option
PCI IRQ Assignment
Serial Communication
Embedded Server
Management
System Security
Keyboard NumLock
(On default)
Report Keyboard Errors
(Report default)

Memory Information Screen

Table 2-3 lists the descriptions for the information fields that appear on the
Memory Information screen.
Table 2-3. Memory Information Screen
Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
Description
Displays a screen to change the IRQ assigned to each of
the integrated devices on the PCI bus, and any installed
expansion cards that require an IRQ.
Displays a screen to configure serial communication,
external serial connector, fail-safe baud rate, remote
terminal type, and redirection after boot.
Displays a screen to configure the front-panel LCD options
and to set a user-defined LCD string.
Displays a screen to configure the system password and
setup password features (see Table 2-8). For further
information, see "Using the System Password" on page 53
and "Using the Setup Password" on page 56.
Determines whether your system starts up with the
NumLock mode activated on 101- or 102-key keyboards
(does not apply to 84-key keyboards).
Enables or disables reporting of keyboard errors during the
POST. Select Report for host systems that have keyboards
attached. Select Do Not Report to suppress all error
messages relating to the keyboard or keyboard controller
during POST. This setting does not affect the operation of
the keyboard itself if a keyboard is attached to the system.
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the system memory speed.
Displays the amount of video memory.
Using the System Setup Program
45