Image 10.6 Owner's Manual page 19

Do not press the AGE I I
SET decrease button, or . _ I--
the setting will change " L
to the letter "c," for a
corded pulse sensor.
The setting can be changed back by pressing the
button again.
To exit the information mode, remove the key.
HOW TO ADJUST THE ANGLE OF THE CONSOLE
In order for the console to receive signals from the
pulse sensor, the console must be angled toward the
pulse sensor. Loosen the knobs on the ends of the
console crossbar, rotate the console to the proper
angle, and retighten the knobs.
HOW TO ADJUST THE CUSHION LEVEL
The rear legs of the t_admill _e dbs_lecl to cushion
legs can be adjUsted fo_.a finer b_ s_er t_hlon
level using the knob on the r_ht side o_the treadmill.
Knob
For a firmer cushion level, turn the knob clockwise; for
a softer cushion level, turn the knob countemlockwise.
Note: The faster you run on the treadmill, the firmer
the cushion level should be. If the cushion level is too
soft, the treadmill will bounce excessively.