Operation And Adjustment; How To Plug In The Power Cord - Image 10.6 Owner's Manual

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WA1.KING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM,
a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
HOW TO PLUG IN THE POWER CORD
:,:Of the
:!:_result in an i
_Check Withi
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
result from weather con-
ditions or from other
appliances being turned 1
on or off. To decrease
the possibility of your
treadmill being dam-
aged, always use a
surge protector (not
included) with your
treadmill,
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps0 with a
14-gauge cord of rwe
feet or less in length.
This product must be
grounded. If it should
malfunction or break
down, grounding pro-
vides a path of least
resistance for electric
current to reduce the
dsk of eisctdc shqclL TI_ ,g._ _iuipped with a
cord having an e_utpmept-g',r_l_g _l_l_=tor and a
ground'mgplug. Plug thd po_=_ €_rd_lnto a surge
protector, and plug the surge-proteCtor into an
appropriate outlet that is properly Instafled and
grounded in accordance with all local codes and
ordinances.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug iUus-
trated in drawing I below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded out-
let is not available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electddan.
The green-colored dgid ear, lug, or the like extending
from the adapter must be connected to a pannanant
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contacta qualified elec-
trician to determine if the outlet box cover Is
grounded before using an adapter.
/Grounded Outlet Box
. ./Grounding Pin
unding Plug
\Grounded Outlet
Treadmill
_= _GroundiGreunded Outlet Box
Adapter
ng Pin
Metal ,_crew
Plug
e Protector