Advertisement
Model No. IMTL49606.0
Serial No.
Serial Number
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
www.proform.com
CALL TOLL-FREE:
1-800-753-4645
new products, prizes,
fitness tips, and much more!
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–5 p.m. MST
ON THE WEB:
www.iconservice.com
www.healthrider.com
new products, prizes,
fitness tips, and much more!
CAUTION
Read all precautions and instruc-
tions in this manual before using
www.nordictrack.com
this equipment. Save this manual
new products, prizes,
for future reference.
fitness tips, and much more!
Decal
Visit our website at
Visit our website at
Visit our website at
USER'S MANUAL
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.jumpking.com
new products, prizes,
fitness tips, and much more!
Visit our website at
www.imagefitness.com
new products, prizes,
fitness tips, and much more!
Advertisement
Table of Contents
Related Manuals for Image 17.5 S IMTL49606.0
Summary of Contents for Image 17.5 S IMTL49606.0
- Page 1 Model No. IMTL49606.0 Serial No. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT Visit our website at DIRECTLY.
-
Page 2: Table Of Contents
HOW TO FOLD AND MOVE THE TREADMILL ........ -
Page 3: Important Precautions
11. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12. To purchase a surge suppressor, see your local IMAGE dealer or call the toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store. - Page 4 SAVE THESE INSTRUCTIONS The decals shown here have been placed on the treadmill. If a decal is missing, or if it is not legible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new IMAGE mill. The 17.5 S treadmill combines advanced technol- ogy with innovative design to help you get the most from your exercise in the convenience of your home. And when you’re not exercising, the 17.5 S treadmill can be folded up, requiring less than half the floor space of other treadmills. -
Page 6: Assembly
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. - Page 7 Base (48) with two Upright Bolts (27) and two Upright Star Washers (39); do not tighten the Upright Bolts yet. 4. Set the Base (48) near the front of the treadmill, with the Power Cord (13) on the Hood (1) as shown.
- Page 8 5. See the left inset drawing. Identify the two Frame Spacers (34). Open the included packet of grease, and apply grease to both sides of both Frame Spacers. Then, identify the outer side of each Frame Spacer. Next, hold a Frame Spacer (34) between the Right Upright (36) and the Lift Frame (59), with the outer side of the Frame Spacer facing the Right Upright.
- Page 9 7. Set the console assembly face down on a soft surface to avoid scratching it. Hold a Handrail (18) near the console assembly. Next, insert the console wire into the hole in the bottom of the Handrail (18) and out of the indi- cated square hole.
- Page 10 10. Lower the Uprights (31, 36). See the inset drawing. Position the Uprights (31, 36) so that the treadmill Frame (74) is centered between the Uprights. Firmly tighten the Upright Bolts (27) and the Frame Bolts (32) on each side of the treadmill.
- Page 11 Belly Pan. 14. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see page 22).
-
Page 12: Operation And Adjustment
(see drawing 1 at the right). To purchase a surge suppressor, see your local IMAGE dealer or call the toll-free tele- phone number on the front cover of this manual and order part number 146148, or see your local electronics store. - Page 13 Make sure that the circuit breaker is in the “reset” position. Next, stand on the foot rails of the treadmill. Locate the clip attached to the key (see the drawing above), and slide the clip securely onto the waistband of your clothes.
- Page 14 Start button, the Speed increase button, or one of the numbered speed buttons. Note: The first time you use the treadmill, periodi- cally inspect the alignment of the walking belt, and center it if necessary (see page 22).
- Page 15 Note: For the treadmill to count your steps accu- rately, correct walking form is important. As you walk, try to maintain a steady pace, a uniform stride length, and a consistent position on the treadmill. Lighter users may also find it helpful to reduce the incline of the treadmill or to increase the speed of the walking belt.
- Page 16 6.5 mph. Note: To change the speed of the walking belt or the incline of the treadmill at any time during the program, press the Speed or Incline buttons. The left side of the display will show the number of kilometers still to be run every few seconds.
- Page 17 Note: To find an appropriate starting goal, walk on the treadmill with the manual mode selected (see page 14), and note the number of steps that you walk during your workout. Then, round that num- ber up to the nearest 500 steps.
- Page 18 If the speed and/or in- cline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the display to alert you.
- Page 19 IMPORTANT: If a “d” appears in the display, the con- sole is in the “demo” mode. This mode is intended to be used only when the treadmill is displayed in a store. When the console is in the demo mode, the power cord...
-
Page 20: How To Fold And Move The Treadmill
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your left hand. Pull the latch knob to the left and hold it. Pivot the frame downward and then release the latch knob. -
Page 21: Troubleshooting
PROBLEM: The power turns off during use SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in. - Page 22 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered. b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD.
-
Page 23: Conditioning Guidelines
For maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in your training zone. Aerobic Exercise If your goal is to strengthen your cardiovascular sys- tem, your exercise must be “aerobic.”... - Page 24 PART LIST—Model No. IMTL49606.0 Key No. Qty. Description Hood 3/4" Screw Left Foot Rail Foot Rail Screw Motor Tension Bolt Motor Tension Washer Wire Tie Motor Bolt Drive Motor Motor Bracket Sliver Ground Screw Power Bracket Star Washer Power Cord Assembly Wheel Bolt Foot Rail Decal Console Fan Assembly...
- Page 25 EXPLODED DRAWING—Model No. IMTL49606.0 R0407A...
-
Page 26: How To Order Replacement Parts
• the MODEL NUMBER of the product (IMTL49606.0) • the NAME of the product (IMAGE 17.5 S treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and PART LIST attached in the center of this manual) ICON Health &...