Nikon COOLPIX P100 User Manual page 72

5 Confirm that the source device is displayed in the transfer options
Source panel and click Start Transfer.
Source device
At the Nikon Transfer default settings, aHpictures are transferred to the computer.
At the Nikon Transfer default settings, ViewNX starts automatically when transfer is
complete and transferred pictures can be viewed.
5"
ko
B
o_
For more information on using Nikon Transfer or ViewNX, refer to the help information
contained in Nikon Transfer or ViewNX (I_]144).
Disconnecting the Camera
Do not turn offthe camera or disconnect tile camera from tile computer during
transfer.
\A!hen transfer is complete, turn offthe camera and disconnect the USBcable.
The camera turns offautomatically if there is no communication with the computer
for 30 minutes while the camera is connected via the USBcable.
[] Charging the Battery
When the camera's power on lamp is blinking slowly in orange, the battery inserted in the camera is
charging (_ 145),
143