Nikon COOLPIX P100 User Manual page 35

o
7a
706
Rotating the zoom control to T (°0 during full-frame playback
mode (_32) zooms in on the current picture, enlarging and
displaying the center of the picture on the monitor.
• The guide at lower right shows which portion isenlarged.
The following operations can be performed while
pictures are zoomed in.
Use Description
Zoomincreases e achtime thezoomcontrolis
Zoom in T(O0 rotated to T (O_), up to about10×.Zoomalso
_!_y,,,_,_,_,_,_÷,_o_,,
Zoom out
Move the display
area
Return to full-frame
playback _)
Crop picture MENU
[]
Switch to shooting
mode
w (ll_)
increasesby rotating the command dial to the right.
Rotate the zoom control to W (_;_). When the
magnification ratio reaches 1x, the display
returns to full frame playback mode.
Zoom also decreases by rotating the
command dial to the left.
Pressthe multi selector A, V, _ or • to move
the display area to other areas of the picture.
Press the _) button.
Press to crop the current picture to contain
only the portion visible in the monitor.
Press the [] button or the shutter release
button to change back to the last chosen
shooting mode. Switching to shooting mode
can also be performed by pressing the •
movie record) button.
12
32,
101
126
32
Pictures Taken Using the Face-Priority Function
When zooming in on a picture taken using the face-priority
function ([]_gl), the picture will be enlarged with the face
detected during shooting at the center of the monitor
(except for pictures shot while Continuous ([]_86) or
Auto bracketing ([_[_8g) was set).
• If more than one face was detected, the picture will be
enlarged with the face on which focus was acquired at the center of the monitor.
Pressthe multi selector A, V, _, or i_ to display other faces that were detected.
• When the zoom control is further rotated towards the i (c() or W (L'_) direction,
the zoom ratio will change and will become a normal playback zoom display.