Nikon COOLPIX S1200PJ Reference Manual page 49

rD
B
rD
E
The Setup Menu
_ ,, r'ptio" _, ,1_, r'escr;_ffon r-_ _-_
Auto off*
Format memory/
Format card
Language
Interface
Charge by
computer
Blink warning
Resetall
Firmware version
Set time before the monitor turns offfor saving power.
The default setting is 1 min.
Allows you to format the internal memory (only when a
memory card is not inserted) or the memory card (when a
memory card is inserted).
All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
pictures to a computer and save them before
formatting.
Choose the language used for camera monitor display.
When transferring pictures to the computer or printer from
the camera, set the USB option to MTP/PTP (default
setting) or Projector. Adjust video mode settings for
connection to a television or an other device. Select from
NTSC (default setting) and PAL.
When set to Auto (default setting), you can charge the
camera's battery by connecting the camera to a computer
(provided that the computer is able to supply power).
When charging by computer, it takes more time to
charge the battery than when using the Charging AC
Adapter EH-69P. Additionally, when charging by
computer and transferring pictures to the computer, it
takes more time to charge the battery.
]mmediatdy after taking a picture using face detection
([]_] 65) (except when using smart portrait mode), if the
camera detects a subject with dosed eyes, the camera
displays the message Did someone blink?, allowing you
to check the picture. The default setting is Off.
_'_ 7O
_'_ 72
Allows you to reset the camera's settings to their default
values. _ 77
Certain settings such as Time zone and date and
Language are not reset.
View the current camera firmware version. _'_ 79
This setting can be changed when the projector is in operation (_ 88).
100