Nikon COOLPIX S1200PJ Reference Manual page 24

Using ViewNX 2
Transferring Images to the Computer
When transferring pictures to the computer from the camera, select the Interface
setting (1_[_100) from tile setup menu (1_[_98) and set tile USB option to MTP/
PTP (default setting).
1 Choose how images will be copied to the computer,
Choose one of the following methods:
• Direct USB connection: Turn the camera offand ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the supplied USB
Cable UC E6.The camera automatically turns on.
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from third party
suppliers) to the computer and insert the memory card.
Ifa message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is
displayed, follow the steps
below to select
Nikon Transfer 2.
1 Under Import pictures and
videos, click Change
program. A program
selection dialog will be
displayed; select Import File using Nikon Transfer 2 and click OK.
2 Double did<Import File.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
g-
T
Connecting the USB Cable
The connection may not be recognized if the ca mera is connected to the computer via a USBhub.
75