Using The Flash (Flash Modes) - Nikon COOLPIX S1200PJ Reference Manual

Features That Can Be Set Using the Multi Selector
Using the Flash (Flash Modes)
The flash mode carl be set to match the shooting conditions.
1 Press the multi selector • (_ flash mode). A
8
2
Press the multi selector • or • to choose the
desired flash mode and press the _]_ button.
• See "Available Flash Modes" ([]_] 55) for more
information.
• If a setting is not applied by pressing the _ button
within a few seconds, the selection will be canceled.
• When _IAIITD (auto) is applied, _4'_ is only displayed for
a few seconds, regardless of Photo info settings
(_-_ 64).
3 Frame the subject and take a
picture.
• The flash lamp indicates flash status when
the shutter-release button is pressed
halfway.
On: The flash will fire when you press
the shutter-release button all the way down.
Blinks: Flash charging. Wait a few seconds and try again.
Off: Flash will not fire when picture is taken.
• If the battery is low, the monitor will turn off, and remain off, while the flash charges.
[] Effective Range of the Flash
When ISO sensitivity is set to Auto, the flash has a range of 03 45 m (1 ft 14 fO at the maximum
wide angle zoom position and a range of 0,5 3& m 11ft 8 in, 11fO at the maximum telephoto
54 zoom position,