Nikon COOLPIX P510 Reference Manual page 62

Hide thumbs Also See for COOLPIX P510:
Table of Contents

Advertisement

oo
_o
T
E _
Scene Mode (Shooting
Suited to Scenes)
tl_ Backlighting
Use when light is coming from behind the subject, throwing
features or details into shadow.
Press the MENU button to set HDR (high dynamic range) compositing
using the HDR setting.
• When HDR is set to Off (default setting): The flash fires to
prevent the backlit subject from being hidden in shadow.
- Shoot pictures with the flash raised.
- The camera focuses at the center area of the frame.
- Press the shutter-release button aHthe way to shoot a
single picture.
• When HDR is set to Level l-Level3: Use when taking
pictures with very bright and dark areas in the same frame.
Select Level 1 when there is lessdifference between bright
and dark areas, and Level :3when there is more difference
between
bright and dark areas.
- The _}_
icon is displayed on the shooting
screen.
- The camera focuses at the center area of the frame.
- When the shutter-release
button is pressed all the way,
the camera shoots pictures continuously
and saves the following
two images.
- Non-HDR composite
image
- HDR composite
image (loss of detail is reduced in highlights and shadows)
- The second image saved is an HDR composite
image. If there is only enough memory
to save one image, an image processed by D-Lighting
([_88)
at the time of shooting,
in which dark areas of the image are corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- The angle of view (i.e.,the area visible in the frame) seen in the saved image will be
narrower than that seen on the monitor at the time of shooting.
- Depending
on the shooting conditions,
dark shadows may appear around bright
subjects and bright areas may appear around dark subjects. You can compensate
by
lowering the level setting.
- Use of a tripod is recommended.
Set Vibration
reduction
in the setup menu (_108)
to Off when using a tripod to stabilize the camera.
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents