Step 1 Turn The Camera On; Turning The Camera On And Off - Nikon COOLPIX P510 Reference Manual

Step 1 Turn t he Camera On
Turning the Camera On and Off
• When tile camera is turned on, tile power<m
lamp
(green) lights and tile monitor
is turned on
(tile power-on lamp
turns offwhen tile monitor is turned
on).
• To turn off the camera, press tile power switch. Both tile monitor and tile
power-on
lamp
are turned off.
• To turn on tile camera in
playback mode,
press and hold the []
(playback)
Button. At this time, the lens does not extend.
[] Power Saving Function (Auto Off)
If no operations are per_rmed _r a while, the monitor will turn off, the camera will enter standby
mode, and the power on lamp will flash, If no operations are per_rmed _r another three minutes,
the camera will turn off automatically.
turn on the monitor again in standby mode, per_rm either one of the _llowing operations,
• Press the power switch, shutter release button, [] button, or • (_1_1movie record) button,
• Rotate the mode dial,
Flashes
No operations _ _"
No operations
performed, performed
• o_o_o_o_ eo_o_g_o_
3 mm
Camera enters Camera turns off.
standby mode.
• The dine that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu (_108),
• By default, the camera enters standby mode in about one minute when you are using shooting
mode or playback mode.
• If you are using the optional AC Adapter EH 62A, the camera enters standby mode after
30 minutes. This setting cannot be changed,
te
o
o
£2_
25