Nikon COOLPIX P510 Reference Manual page 126

Pressthe MENU b utton -'_ Y tab (_13)
(setup)
From the menu screen, select the Y tab to display the
setup menu, and then you can change the following
settings.
108
Option Description
Select the image displayed as the welcome screen
when the camera is turned on. Select CO01.PIX to
Welcome screen display the COOLPIX logo. Select Select an image to _'_74
use a picture taken with the camera as the welcome
screen. The default setting is None.
Time zone and date
Set settings related to the camera's date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the _" travel
destination is set, the camera automatically calculates
the time difference between the travel destination and
the _" home time zone, and saves images using the
date and time of the travel destination.
_75
Set the image display after shooting, the screen
Monitor settings brightness and whether or not to display a framing grid _78
or histograms on the monitor.
Print date
Imprint the shooting date and time on pictures at the
time of shooting.The default setting is Off.
• Dates cannot be imprinted in the following
situations.
- When the scene mode is set to Easy panorama,
Panorama assist, or 3D photography
- When Pre-shooting cache, Continuous H: 120
fps or Continuous H: 60 fps is selected for
Continuous (_61) k] the shooting menu
- During movie recording
Reduce blurring caused by camera shake when
shooting. The default setting is On.
• When using a tripod to stabilize the camera, set this
feature to Off to prevent this feature from
malfunctioning.
Vibration reduction
_79
_80