Troubleshooting - Nikon COOLPIX P510 Reference Manual

g
z
F
o_
x
Troubleshooting
Problem
Monitor or
viewfinder is blank.
Monitor is hard to
see.
The viewfinder is
hard to see, Adjust diopter adjustment control.
Display does not
switch to monitor
(or viewfinder)
when the
Iml
button is pressed.
Date and time of
recording are not
correct.
No information
displayed in
monitor.
Print date not
available,
Cause/Solution
Camera is of_
Battery is exhausted.
Standby mode for saving power: Press the power switch,
shutter release button, [] button or • (_ movie record)
button, or rotate the mode dial,
Monitor and viewfinder cannot be used simultaneously, Press
the IOI button to alternate between displays,
Camera and computer are connected via USB cable.
Camera and TV are connected via audio/video cable or HDMI
cable.
Interval timer shooting in progress.
Ambient lighting too bright: move to darker location or use
viewfinder.
Actjust monitor brightness.
Monitor is dirty, Clean monitor.
You cannot switch the display in the following situations:
While recording or playing back movies
While recording or playing back voice memos
During interval timer shooting
While connected to a printer
You cannot switch the display while displaying a certain error
message.
If the camera clock has not been set ("Date not set" indicator
flashes during shooting), still pictures have a time stamp of
"00/00/0000 00:00"; and movies are dated "01/01/12 00:O0J' Set
the correct date and time using Time zone and date in the
setup menu,
The camera clock is not as accurate as a normal clock, such as
watches. Check camera clock regularly against more accurate
timepieces and reset as required,
Shooting and photo information may be hidden. Press the DISP
button until shooting data or photo information is displayed,
Time zone and date in the setup menu has not been set.
q3
25
24
25
16
90, 93
90, _23
_43
16
108, _78
16
96,100
88
61
90
26,108
_75
108,
_75
15
26,108,
_75
_78